Truck Mounted Concrete Pumps

M 20-4

The little one with the great possibilities

  • Flexible mast with Z-fold (less bends, optimum slip properties)
  • Low unfolding height
  • TR-Support for compact support and difficult Aufstellsituationen
  • Pump up to 90 m³ / h. S-transfer tube (BSF)
  • Agile 2-axle chassis
  • Special: Sanima Kit Saniereinsätze

M24-4

The Specialist and Allrounder - high capacity utilization
in the hall, in the tunnel and on small sites

  • Flexible mast with ZR-folding with 4 arms
  • Low unfolding height
  • TRD-Support for compact support
  • S-tube concrete pump up to 160 m³ / h.
  • Agile 2-axle chassis. Weight reserves for magazines, piping etc. on 3-axle chassis.
  • Short Wheel Base without mast overhang
  • Application: small to medium, universal construction sites, urban canyons, construction sites with limited installation situation, tunnels, buildings and under bridges

M 28-4

A special class for
multi-functional applications

  • Flexible mast with Z-fold (less bends, optimum slip properties) Upper 20m class with optimized Ausfahlthöhe with appropriate reach / height
  • TRD-support with compact Abstützmaßen
  • S-tube concrete pump up to 160 m³ / h
  • Compact 3-axle chassis without mast overhang
  • Short Wheel Base without mast overhang
  • Application: small to medium, universal construction sites, urban canyons, construction sites with limited installation situation, halls, tunnels or under bridges

M31-5

The hall master – almost unbeatable in tight spaces

  • Five-arm boom in the 30 m class has 5.7 m unfolding height
  • High level of flexibility of the Multi-ZR-folding
  • Flexible for an unfamiliar building environment
  • Pumps up to 160 m³/h. S-Valve (BSF)
  • Compact construction without overhang, very manoeuvrable
  • Flexibility right through to the charging area because of the modular construction
  • With Ergonic 2.0 cntrol 
  • Application: small to medium, universal construction sites, construction sites with limited positioning posibillities, halls, tunnels or below bridges.

M36-4

The next generation of the 36-4:
An allrounder is setting standards

  • A gross weight of less than 26 t incl. sufficient reserves for payload and operating materials
  • Steady boom, thanks to the intelligent installation of the delivery line and the harmonious, continuous rigidity of the steel structure
  • Improved safety, thanks to compliance with all the valid standards and codes of practice
  • Service-friendly as a result of its optimised accessibility and consistent screw concept
  • Lower service costs thanks to maintenance-free components, fewer special components (only 2 standard delivery line bends) and lower volumes of functional fluids (oil volume reduced by 30 %)

M 38-5

  • The new boom at a glance

    • Approx. 38 m vertical reach with 5 arms in roll Z-folding
    • No dead space, enhanced flexibility
    • Direct response characteristics of boom control
    • Safety thanks to reduced boom vibrations
    • EBC (optional) for vibration damping, one-handed control, restriction of workspace
    • Standard delivery line bends of 90° and 45° with extended collars for longer service life
    • Low unfolding height

M42-5

The next Generation of the 42-5: Setting new standards for truck-mounted concrete pumps

  • gross weight of less than 32 t incl. sufficient reserves for payload and operating materials
  • Steady boom, thanks to the intelligent installation of the delivery line and the harmonious, continuous rigidity of the steel structure
  • Improved safety, thanks to compliance with all the latest standards and codes of practice, e.g. CE Machinery Directive
  • Service-friendly as a result of its optimised accessibility and consistent screw concept
  • Lower service costs thanks to maintenance-free components, fewer special components (only 3 standard delivery line bends) and lower volumes of functional fluids (oil volume reduced by 300 l)

M46-5

The advantage of the M46-5

  • A gross weight of less than 32 t incl. sufficient reserves for payload and functional fluids
  • Smooth 5-arm placing boom thanks to intelligent laying of the delivery line and the harmonious continuity of the steel structure
  • Efficient working thanks to consistent sophisticated ergonomics and Ergonic® 2.0, the innovative control hardware and software
  • Maximum safety thanks to comprehensive consideration of applicable standards and directives
  • Service-friendly thanks to optimized accessibility and consistent screw concept
  • Minimal service costs thanks to maintenance-free components, fewer different types of components (e.g. only four standard elbow types) and smaller quantities of functional fluids
  • The I frame follows the distortions of the chassis: Results in less distortion and longer service life
  • Flexible, space-saving TRDI support system, in particular, significantly reduced extent of supports when using OSS* and ESC**

M47-5

 

The advantage of the M47-5

  • A gross weight of less than 32 t incl. sufficient reserves for payload and functional fluids
  • Smooth 5-arm placing boom thanks to intelligent laying of the delivery line and the harmonious continuity of the steel structure
  • Efficient working thanks to consistent sophisticated ergonomics and Ergonic® 2.0, the innovative control hardware and software
  • Maximum safety thanks to comprehensive consideration of applicable standards and directives
  • Service-friendly thanks to optimized accessibility and consistent screw concept
  • Minimal service costs thanks to maintenance-free components, fewer different types of components (e.g. only four standard elbow types) and smaller quantities of functional fluids
  • The I frame follows the distortions of the chassis: Results in less distortion and longer service life
  • Flexible, space-saving TRDI support system, in particular, significantly reduced extent of supports when using OSS* and ESC**

M 49-5

Largest range in the 40 m class,
small support surface and space for many accessories

  • Flexible, compact boom with RZ-folding with 5 arms
  • TRDI - Support for compact support area, fast setting and maximum stability
  • 16 H pump (160 m³ / h). In the Chinese market with 15 HLS (150 m³ / h)
  • 4-axle chassis for optimum weight distribution
  • Use: Large construction sites, construction sites with limited installation situation (OSS as an option available). All-round machine with large work area by the high mast and construction flexibility

M 53-6

The new generation at a glance

Main features
Hohe flexibility and greater coverage with high ceilings concreting by the 6-arm placing boom
Effizientes work by a well thought ergonomics
Maximale security thanks to comprehensive consideration of valid standards
Servicefreundlich through optimum accessibility
Minimale service costs due to maintenance-free components

M 54-5

The new generation at a glance

The five-arm M 54 convinces with a higher load possible on the boom tip of 200 kg. The placing boom is based on the M 56-5.

  • Quiet 5-arm placing boom through intelligent routing of the delivery line and the harmonious development of the Steel Structure
  • Efficient work by a well thought ergonomics

  • Even more security thanks to comprehensive consideration of valid standards

  • Service-friendly due to optimum accessibility

  • Lower service costs due to maintenance-free components

  • Using a 4m end hose with Endschlauchquetschventil or a split end hose possible

M56-5

The new generation at a glance

  • Quiet 5-arm placing boom through intelligent routing of the delivery line and the harmonious development of the Steel Structure
  • Efficient work by a well thought ergonomics
  • Even more security thanks to comprehensive consideration of valid standards
  • Service-friendly due to optimum accessibility
  • Lower service costs due to maintenance-free components
 

M 62-6

The maximum flexibility with a reach height of 62 m

  • Mast with 6 arms, RZ-fold for optimum flexibility in this class
  • TRDV - Support for compact support, position variable Abstüztung, fast setting up stability
  • Pumps up to 200 m³ / h available. S-transfer tube (BSF)
  • 6-axle chassis for optimum weight distribution and ample weight reserves
  • Use: Big construction sites, construction sites with limited installation situation (OSS One Side Support)

M63-5

The maximum flexibility with a vertical reach of 63 m

  • Mast with 5 arms and RZ Faltzung for optimal flexibility in this class
  • TRDV - Support for compact support, position variable Abstüztung, fast setting up stability
  • Pumps up to 200 m³ / h available. S-transfer tube (BSF)
  • 6-axle chassis for optimum weight distribution and ample weight reserves
  • Use: Big construction sites, construction sites with limited installation situation (OSS One Side Support)

M58-5

The new large boom allrounder:
Far-reaching flexibility on 5 or 6 axles

  • Flexible 5-arm boom with RZ-folding with a in the 50 m class very low unfolding height of 12.3 m
  • TRDV-support. Fast support and thanks to OSS (One Side Support) flexibly in confined spaces on site
  • Pumps up to 200 m³ / h.  S-transfer tube (BSF)
  • DN 125, 2-layer delivery line
  • Also available on 5-axle chassis. Depending on admission rules and equipment.
  • Use: Big construction sites, construction sites with difficult Aufstellsituationen (OSS One Side Support)
Login

Forgot your password?

Login