MR Tower Cranes

MR Tower Cranes

MR

 

 

MR 90 C

The MR crane range is specifically suited for congested construction sites. The jib can be luffed to a nearly vertical position while attaining excellent underhook heights and obstacle avoidance. High performance slewing and hoisting equipment provide precise control of loads throughout the entire working radius.

 

Specifications
 
Hook Height per Base 51.2 m
(168 ft)
Maximum Capacity 8 t
(8.8 USt)
Maximum Radius 45 m
(147.6 ft)
Maximum Tip Capacity 1.6 t
(1.8 USt)

MR 160 C

The MR crane range is specifically suited for congested construction sites. The jib can be luffed to a nearly vertical position while attaining excellent underhook heights and obstacle avoidance. High performance slewing and hoisting equipment provide precise control of loads throughout the entire working radius.

 

Specifications
 
Hook Height per Base 61.1 m
(200.5 ft)
Maximum Capacity 10 t
(11 USt)
Maximum Radius 50 m
(164 ft)
Maximum Tip Capacity 2.4 t
(2.6 USt)
Maximum Tip Height 49.4 m
(162 ft)

MR 225 A

The MR 225 A’s luffing jib can extend to a 180 ft working radius or be raised to near vertical positions for a full range of lifting capabilities. Variable lengths of K mast are available to adjust the crane to the required elevation.

 

Specifications
 
Hook Height per Base 56 m
(183.7 ft)
Maximum Capacity 14 t
(15.4 USt)
Maximum Radius 55 m
(180.4 ft)
Maximum Tip Capacity 2.15 t
(2.4 USt)

 

 

 

MR 295 H16

The MR 295 is a mid-size luffing jib crane featuring a fixed counterweight that reduces several moving parts and creates a compact counterjib. Seven jib lengths are offered in 16.4 ft increments, and two capacities are available.

Specifications
 
Hook Height per Base 70.4 m
(231 ft)
Maximum Capacity 16 t
(17.6 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 2.8 t
(3.1 USt)
Maximum Tip Height 49.4 m
(162 ft)

MR 295 H20

The MR 295 is a mid-size luffing jib crane featuring a fixed counterweight that reduces several moving parts and creates a compact counterjib. Seven jib lengths are offered in 16.4 ft increments, and two capacities are available.

 

Specifications
 
Hook Height per Base 70.4 m
(231 ft)
Maximum Capacity 20 t
(22 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 2.7 t
(3 USt)

 

MR 298

 

Specifications
 
Hook Height per Base 70.4 m
(231 ft)
Maximum Capacity 24 t
(26.5 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 2.4 t
(2.6 USt)

MR 418

The Potain MR 418 is designed to get you set up and working faster while still providing the capacity and compact footprint that our cranes are known for.

A new on-board control system allows for operation mere minutes after assembly is completed, and the uniquely mounted luffing mechanism and hoist ensures there is plenty of room for operation, even in the tightest of jobsites.

Perfect for power plants or high-rise buildings, including super-tall structures.

Total luffing time: 1 min 15 sec
Maximum hoisting speed: 254 meters per minute

 

Specifications
 
Hook Height per Base 89.4 m
(293.3 ft)
Maximum Capacity 24 t
(26.5 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 5 t
(5.5 USt)

 

MR 608

The Potain MR are designed to get you setup and working faster while still providing the capacity and compact footprint that our cranes are known for.

A new on-board control system allows for operation mere minutes after assembly is completed, and the uniquely mounted luffing mechanism and hoist ensures there is plenty of room for operation, even in the tightest of jobsites.

Perfect for power plants or high-rise buildings, including super-tall structures.

Specifications
 
Hook Height per Base 77.8 m
(255.2 ft)
Maximum Capacity 32 t
(35.3 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 9 t
(9.9 USt)
Maximum Tip Height 72.2 m
(237 ft)

 

 

 

MR 618

The Potain MR are designed to get you setup and working faster while still providing the capacity and compact footprint that our cranes are known for.

A new on-board control system allows for operation mere minutes after assembly is completed, and the uniquely mounted luffing mechanism and hoist ensures there is plenty of room for operation, even in the tightest of jobsites.

Perfect for power plants or high-rise buildings, including super-tall structures

 

Specifications
 
Hook Height per Base 74.4 m
(244.1 ft)
Maximum Capacity 32 t
(35.3 USt)
Maximum Radius 60 m
(196.9 ft)
Maximum Tip Capacity 8.25 t
(9.1 USt)
Login

Forgot your password?

Login