MD Topbelt Tower cranes

MD Topbelt Tower cranes

Potain MD Topbelt

Topbelt: the association of a crane and a concrete conveyor allow a high rate of concreting, covering a large surface with minimum interference on the construction site.

Two ways of functioning:

  • Distributing crane of strong capacity
  • Crane associated with a conveyor belt for intensive concreting

 

MD 1600 Topbelt 24

The MD1600 Topbelt 24 offers all the advantages combined by a distributing crane of strong capacity associated with a conveyor belt for intensive concrete placing

In a distributing crane mode, the MD1600 distinguishes itself by a strong capacity load chart with 17,4t at the radius of 80 m and a maximum load of 64t at the radius of 24,6m, allowing the lifting of heavy loads or a concreting with a concrete bucket of 7m3. The crane has a free height under hook of 91,6m.

In a Topbelt mode, the crane handles a conveyor for concreting, allowing a volume of 240m3 per hour by covering and by overflying a surface of 25.000m² with a maximum radius of 105m. The conveyor uses a standard belt size of 24' (inches) wide.


The Topbelt system which can work with various slopes, until +/-25° and can be also climbed up along the mast of the crane, so the Topbelt system can follow the progress of the construction

 

Specifications
 
Hook Height per Base 91.6 m
(300.5 ft)
Maximum Capacity 64 t
(70.5 USt)
Maximum Radius 80 m
(262.5 ft)
Maximum Tip Capacity 17.4 t
(19.2 USt)

MD 2200 Topbelt 30

The MD 2200 Topbelt 30 offers all the advantages combined by a distributing crane of strong capacity associated with a conveyor belt for intensive concrete placing

In a distributing crane mode, the MD 2200 distinguishes itself by a strong capacity load chart with 22.8t at the radius of 80 m and a maximum load of 60t at the radius of 32m, allowing the lifting of heavy loads or a concreting with a concrete bucket of 9m3. The crane has a free height under hook of 93m. 

In a Topbelt mode, the crane handles a conveyor for concreting, allowing a volume of 400m3 per hour by covering and by overflying a surface of 25.000m² with a maximum radius of 105m. The conveyor uses a standard belt size of 30' (inches) wide.


The Topbelt system which can work with various slopes, until +/-20° and can be also climbed up along the mast of the crane, so the Topbelt system can follow the progress of the construction

 

Specifications
 
Hook Height per Base 93 m
(305.1 ft)
Maximum Capacity 60 t
(66.1 USt)
Maximum Radius 80 m
(262.5 ft)
Maximum Tip Capacity 22.8 t
(25.1 USt)

 

Login

Forgot your password?

Login